| June 1, 2010 | WinDaq add-on is released through CNET.COM to minimize traffic to our ISP |
| July 12, 2010 | Event Counter is added |
| Aug 12, 2010 | Calculated Channel Recorder is added |
| Sept 1, 2010 | Increase the number of calculated channel to 16 for Calculated Channel Recorder |
| Sept 7, 2010 | FFT Viewer for WWB is added |
| Oct 1, 2010 | Calculated Trigger Recorder is added |
| Oct 7, 2010 | Add Trigger Status to Calculated Trigger Recorder Fixed the error message "Run Time Error 13, Type mismatch" when WinDaq throughput rate is higher than 10000 s/s while the PC's license is lower that Full Corporate License. |
| Oct 13, 2010: |
Magic Meter is added |
| Nov 2, 2010 |
Instrumentation Gauge is added Both Magic Meter and Gauge now support math involving data-window results, for example, #rms0*0.3 |
| Nov 10, 2010 |
Instrumentation Gauge and Magic Meter's last location will be retained |
| Nov 20, 2010 | WinDaq add-on will not quit when WinDaq changes its configuration. |
| Dec 1, 2010 |
WinDaq Excel Link supports both 32-bit and 64-bit Excel |
| Dec 8, 2010 |
MagicMeter, Gauge, Calculated DAC output and Alarm II support non-English
(United States) Regional and Language options.
Since other calculated add-ons require more computing powers, instead of allowing non-English (United States) Regional and Language options, it will warn users and ask for modification if period is not the decimal mark. |
| Jan 7, 2011 |
Fixed following bugs:
1) Gauge does not display correct unit |
| Feb 16, 2011 | Remove some restrictions for unregistered users, such as copy-and-paste function |
| March 24, 2011 | Dynamometer is added |
| March 28, 2011 | Allow sign selection for torque shaft rotation in dyno recorder. Supports Torque Display 6400 and 3410 |
| March 31, 2011 | Added Excel direct link to Manual NoteTaker, Remote Event Note Taker and Paced Note Taker |
| April 1, 2011 | Users without administrator right can retain Windaq Add-on settings |
| April 15, 2011 | Added instrument configuration for Dynamometer recorder |
| May 18, 2011 |
Added Logarithmic Frequency Scaling to FFT II Added advanced calculated channel to Alarm II Remove the maximize button for Alarm II to prevent resizing error |
| May 24, 2011 (version 1.56) |
Better post-error handling for math equation option under MagicMeter and Gauge Alarm II is available for DI-148/158 |
| June 7, 2011 (version 1.58) |
Min/Max retainers is added to Gauge Fixed math error in adds involving calculated channels. The glitch happens when result is very near zero |
| Sept 20, 2011 (version 1.65) |
Support DI-149's extra features New cross hair features (via right mouse button) for FFT II and Spectrogram II  Spectrogram uses actual (averaged) update interval to calculate elapsed time for cross-hair Alarm II supports Force Reset and Force Set options Alarm II can access digital input via #dig |
| Oct 4, 2011
(version 1.67) |
Fixed the polling interval of Alarm II, which was accidentally set to 1Hz in
previous release |
| Nov 1, 2011
(version 1.72)
|
Remove obsolete add-ons to make room for new add-ons GUI improvement for Calculated Channel AuxInputIndicator is added Digital Plot is added Keyboard operation is added to Digital Output II D7 error is fixed on Digital Output II Global Key option is added to Digital Output II |
| Nov 21, 2011
(version 1.73) |
Global Key option is added to WinDaq Manual Note Taker |
| Dec 12, 2011
(version 1.86) |
Advanced Triggered Storage is added
Added to Event Counter are: Math module, Analog trigger and WinDaq link Added to Remote Note Taker are Analog trigger |
| Jan 24, 2012
(version 1.95) |
GUI improvement for FFT II, Spectrogram II, DigitalOutput II, Gauge, Calculated Analog Output and MagicMeter |
|
Feb 14, 2012
(version 1.99) |
GUI improvement for Calculated Waveform, PacedNoteTaker
Better error handling for Calculated Channel Recorder II |
|
Feb 28, 2012
(version 2.02) |
Calculated Analog Trigger with Excel Link
is released
WinDaq Add-on Batch Operation Paced Note Taker with Excel Link allows timers to go higher than 60 seconds, up to 32000 seconds |
|
March 2, 2012
(version 2.03) |
Allows FFT II and Spectrogram II to remove DC component before performing FFT |
(version 2.14) |
Email/Text Messaging (SMS)-enabled data acquisition, or Email link for WinDaq add-ons
Integration function added to Calculated Channel Recorder II Digital Output II is renamed to Digital and Alarm Output Email/SMS-option added to
Digital and Alarm Output
and Remote Event Note Taker
Fixed the error: Digital and Alarm Output failed to retain its slider settings |
Last update: 05/03/12
© www.ultimaserial.com